March F2

Looking for a rear upright 722/732, can any one help/ even damaged repairable
Thanks Mike Scott

Replies to This Discussion

Permalink Reply by Stephen Page on January 5, 2009 at 9:52am

Hi Scott
Try Marc Bahner, email: bahnerengineering@earthlink.net
or
Taylor Race Engineering: in Plano Texas
Good luck :-))
All the best - Stephen

▶ Reply

Permalink Reply by mike scott on January 5, 2009 at 3:38pm

Stephen, thanks for the info
Regards Mike

▶ Reply

Permalink Reply by fmaderi on January 27, 2009 at 5:22am

scott. do you have anything for a 718 march ? franklin1111@aol.com

▶ Reply

Permalink Reply by mike scott on January 27, 2009 at 1:46pm

Hi, is this a f/ford? the only parts i have for sale are 722/732 front mag uprights and lower front arms,(wishbones) let me know what you are needing my friend may have some parts

▶ Reply

Permalink Reply by J. Byron Walker on January 28, 2009 at 1:24pm

Have several ses of rear uprights from March - 1975 - 2 ( March used the same on the F-2 as the SST series cars - Don't know if these are the same - Possibly check with MARCHIVES to verify.

I have thought of taking molds but need one that can be cut apart to define the interior. Then cast several sets - Interested ??

1-248-496-2212 - Byron Walker

▶ Reply

Permalink Reply by mike scott on January 28, 2009 at 1:44pm

Bryon, thanks for the reply, could you send me pics on a p.m?( my address on my page) I have a 752 that i am rebuilding the rears are not the same as the earlier 712/722/732 simular but not the same, might be interested in remakes if we can make a job lot to keep price resonable,
Mike

▶ Reply

Permalink Reply by J. Byron Walker on March 28, 2009 at 11:16pm

I return to Detroit in April (late) and will be able to get some details and data off the ones I have - also have one set (spares) from a Villenoive car . Ill keep you posted ( castings are available from wax molds - I can convert - Reverse eng ) these parts.

Byron