How come I can screw together just about anything but when it comes to computers Im a yutz....website navigation is just not my thing.....10 more times and I'll get the hang of this one....HA!
For sale in "My Page"....take a look.

Views: 25

Attachments:

Reply to This

Replies to This Discussion

still trying to figure this all out....(the site I mean)

1967 Sprite
$5900 less motor.
$9500 with a 1098 cc motor.

For $5.9 K you get a complete car less long block. All the best equpment used in building this car.
ALL engine ancillaries souch as belt idler system, exhaust, carbs/manifold, clutch slave, fuel regulator and lines
are included.
Running with VARA since 1999 after a complete resoration. Class champion GP in 2005, 2006, 2008. Very competitive , 1.46 at Willow Springs. Gets lots of looks. This is only a partial list of features.

Carburetors HS2 setup or HS4 setup your choice. Others included in optional spares package.
Very straight tub. Cage bars and sidebars and front low hoop.
Offset rear 1/4 elliptic leaf springs.
Koni shocks front and rear.
Lever shocks for vintage correctness.
4.22 gearset or 3.90 either locked or open, your choice, strengthened rear housing, adjustable Panhard bar,
upper CrMo struts with rod ends.
All 3 piece rod ends throughout.
Front and rear adjustable sway bars plus spares.
Steel axles
Double bearing hubs (hubs and axles 15 races from new).
8 gallon Fuel Safe, filter, pump, regulator, guage.
13 x 5.5 Superlite wheels (4) with 2 race 185 Yoko's
Trans with straight cut close ratio gearset.
Tilton/Wilwood pedal box all masters just freshened.
AP 6" pressure plate and Kevlar puck disc.
Hawker/ Odesey battery , Cole Hersee switch, full gages, Autometer tell-tale tak, circuit breakers, A/N switches
MSD6AL (wih rev limiter)
Right side windo net, 7 point belts, aluminum seat.
3 q Accusump. Canton billet remote filter housing, all braided lines which are fresh.
Setrab oil cooler
Camber adjusters, rod end rack, 550# springs with a 450# spare set.
Aluminum double crossflow radiator, aluminum swirl pot w/ 14 psi cap.
New AFFF fire system
One piece fiberglass front hood/fenders and included is 2 steel fenders and a fiberglass hood.
Two sets of thru transom headers.
Log books back to the late 70's.
All records and setup binder.

Spare parts package availiable. Carb setups, engine spares, chassis spares and on and on.

Option .....1098 + .040" can be provided installed and ready to go for $9500

Contact me at varateck.jb(at)att(dot)net
or call 541-6484 in the 714 area code M-F 7am-4pm Pacific time.
Attachments:
Car has been sold.

JB

RSS

© 2024   Created by Travis Buckingham and Stephen Page   Powered by Buckingham Creative

Badges  |  Report an Issue  |  Terms of Service