Gotti Race Wheels

Gotti 3 Piece Wheels

Fronts are 13" X 11" with 5 1/2" Back Space
Rears are 13" X 14" with 6 1/2" Back Space
All are Center Lock, 6 pin on 4.25 pcd for 5/8" drive pins
Fitted with Gotti bead lock screws
All good usable condition except for one marked "wheel hop" It could be straightened.
Suitable for vintage Formula Atlantic, B Sports Racer, etc.

Three sets available

$1000 per set
$2500 all three sets

Robert Metcalf
Metcalf Racing
metcalfracing.com
214-298-9837

Views: 214

Attachments:

▶ Reply to This

Replies to This Discussion

Permalink Reply by Jim Hillyer on February 4, 2009 at 9:29pm
Any idea where I can get GOTTI wheel halves ???
I have wheels w/12 pin centers for a REYNARD FORMULA CONTINENTAL - one half is 1/2 inch too narrow

I have sent all of the components out and had them straightened.

Jim Hillyer - Team Manager
BNRT, INC.
414-339-8588
Permalink Reply by Robert Metcalf on February 5, 2009 at 9:41am
Jim, I haven't dealt with Gotti in quite a long time. The wheels I have were used on a Camel Light in the 90s. I don't know where to send you for parts these days. Have you tried to have BBS, Kodiak or some other wheel maker build custom halves to fit your Gotti centers? Just a thought. Good luck.
Permalink Reply by Jim Hillyer on February 6, 2009 at 6:01pm
thanks

I will try to contact BBS

Jim

RSS

© 2024   Created by Travis Buckingham and Stephen Page   Powered by Buckingham Creative

Badges  |  Report an Issue  |  Terms of Service